Cleanrooms depend on HVAC, chilled water and compressed air staying within limits, around the clock. En-Stream watches those utilities and the energy behind them live, and alerts the right people the moment a reading drifts.
A chiller, air handler or compressor that drifts out of range may only show up at the next manual round, after it has already affected production areas.
Utility data sits in building systems, machine panels and logbooks, so trends are hard to see and reports are slow to compile.
Air handlers, chillers and compressors run continuously, but their consumption is usually visible only on the monthly bill.
En-Stream reads these from your existing meters, drives and controllers, or from transmitters wired to a gateway.
Power and running status of air handling units, fans and chillers, from their meters, drives and controllers.
From transmitters on a gateway's 0–20 mA or 0–10 V inputs, with alarms on the limits you set.
Flow, pressure and compressor power, so leaks and abnormal demand show up early.
Gas and fuel used by boilers and generators, next to electricity.
Consumption per block, building or utility, and supply from grid, generator and solar.
HVAC, compressed air, boiler gas and fuel in one view, next to electricity.
Your own limits on temperature, pressure and running status, with the right person notified the moment something drifts.
One view for engineering, another for management, each with the readings that matter to them.
Measured emissions from every energy source, for sustainability and energy reports.
The ES-IGW-B1 reads energy meters, drives and controllers over Modbus TCP and RS485. It's the gateway behind the ISO 50001 result below.
Add the ES-IGW-E1 to take temperature, pressure, flow and humidity transmitters directly on its analog inputs, and running signals on its digital inputs.
ISO 50001 asks for measured, ongoing data on how a site uses energy. En-Stream provides it per meter, utility and energy source, and keeps the history for your reviews and audits. Certification itself is done by your certification body.
Yes. Audit logs record every action, and role-based access limits what each user can see.
Yes. Set alarm conditions on any reading, such as temperature, pressure or compressor status, and the right people are notified the moment it drifts.
Yes. Run En-Stream on its hosted platform or on your own on-premises servers.
A practical guide for plant and energy managers. Find where power is wasted, use cheaper sources at the right time, and keep the savings with monitoring.
Book a 30-minute demo and see how En-Stream connects to the meters, machines and generators you already run.
Machine health on looms and spinning lines, plus energy per production unit.
Boiler, chiller and compressed-air monitoring, plus production line uptime.
Pump, motor and utility monitoring for continuous processes.
Mains, generator, fuel and DC power monitoring, plus panel alarms, across distributed sites.
Temperature monitoring, compressor health and instant alerts on power loss.
Multi-meter energy tracking, plus HVAC and generator costs per floor or tenant.
Line uptime, motor and VFD health, and compressed air leak detection.
