Stored goods depend on refrigeration running and power staying on, day and night. En-Stream watches cold room temperatures, compressors and supply live, and alerts the right people the moment something goes wrong.
A cold room that drifts above its limit overnight may only be found at the next manual check.
When the grid fails and the generator doesn't take over, the first sign can be a warm room.
A compressor that runs longer and harder than it should costs energy long before it fails.
En-Stream reads these from your meters and controllers, or from sensors and contacts wired to a gateway.
From temperature transmitters on a gateway's analog inputs, with alarms on the limits you set.
Power and running status of each compressor, from its meter, drive or a gateway's digital inputs.
Grid, generator and solar, live, with an alert the moment mains power is lost.
Door, fault and alarm signals on a gateway's digital inputs, turned into alerts.
Consumption from energy meters per cold room, plant room or site.
Alarms on temperature limits, power loss or a stopped compressor, sent the moment they happen.
Grid, generator and solar feeding the site, live, so you see when the generator takes over.
A view per cold room or site, so each team sees the readings that matter to them.
The ES-IGW-E1 takes temperature transmitters on its analog inputs, and door, fault and mains signals on its digital inputs.
Add the ES-IGW-B1 to read energy meters and compressor controllers over Modbus TCP and RS485.
Yes. Set alarm conditions on any reading, such as a temperature limit, and the right people are notified the moment it drifts.
Yes. En-Stream shows grid, generator and solar live, and an alarm on the supply readings notifies your team the moment a source drops out.
Yes. Every site reports to the same platform, and remote access lets you open the dashboards from any device.
No. Gateways connect to the meters, drives and controllers you already have. Most sites take 1–3 days on site, and larger plants are installed in phases, so production never stops.
A practical guide for plant and energy managers. Find where power is wasted, use cheaper sources at the right time, and keep the savings with monitoring.
Book a 30-minute demo and see how En-Stream connects to the meters, machines and generators you already run.
HVAC, cleanroom utilities and compressed air monitoring for compliance and uptime.
Machine health on looms and spinning lines, plus energy per production unit.
Boiler, chiller and compressed-air monitoring, plus production line uptime.
Pump, motor and utility monitoring for continuous processes.
Mains, generator, fuel and DC power monitoring, plus panel alarms, across distributed sites.
Multi-meter energy tracking, plus HVAC and generator costs per floor or tenant.
Line uptime, motor and VFD health, and compressed air leak detection.
