Energy and machine monitoring for your industry
Every industry runs different equipment and worries about different failures. See what En-Stream measures, which dashboards matter and which gateway fits, industry by industry.
Energy monitoring for sites that can't afford downtime.
Cleanrooms depend on HVAC, chilled water and compressed air staying within limits, around the clock. En-Stream watches those utilities and the energy behind them live, and alerts the right people the moment a reading drifts.
What we measure- HVAC and air handlers
- Temperature, pressure and humidity
- Compressed air
Spinning, weaving and processing lines run around the clock, and every one of them draws power. En-Stream shows the energy use and machine health of each line in one live view, using the meters, VFDs and PLCs you already have.
What we measure- Power per line and machine
- Motor and VFD health
- Energy per unit produced
Boilers, chillers, refrigeration and compressed air keep a food plant running, and each one uses energy all day. En-Stream shows every utility and line in one live view, so you catch waste and failing equipment before they cost a shift.
What we measure- Boilers
- Chillers and refrigeration
- Compressed air
Continuous processes depend on pumps, motors and utilities that can't stop without warning. En-Stream watches them live through the PLCs, VFDs and meters you already have, and warns your team before a fault becomes a shutdown.
What we measure- Pump and motor health
- Pressure, flow and temperature
- Power per section and utility
Every site depends on mains, generators, DC power and fuel, often with nobody there to watch them. En-Stream brings ATS readings, breaker status, DC current, fuel levels and panel alarms from every location into one live view, and alerts your team the moment something changes.
What we measure- Mains and generator ATS
- Breaker and changeover status
- Fuel tanks
Stored goods depend on refrigeration running and power staying on, day and night. En-Stream watches cold room temperatures, compressors and supply live, and alerts the right people the moment something goes wrong.
What we measure- Cold room temperatures
- Compressor health
- Power supply
Offices and malls run HVAC, lifts and generators all day, and the bill rarely shows where the energy went. En-Stream tracks every meter in one live view, so you can see consumption and generator costs per floor or tenant.
What we measure- Energy per floor or tenant
- HVAC
- Generator and fuel
Packaging lines run fast, and a stopped motor or a drop in air pressure stops everything behind it. En-Stream watches motors, drives and compressed air live, so your team catches problems before the line stops.
What we measure- Line uptime
- Motor and VFD health
- Compressed air
Any operation where energy or machine uptime matters.
One platform for every site
Works with what you already run
PLCs, VFDs, meters and sensors from any vendor connect as they are, legacy equipment included. No machine has to be replaced.
One view for every utility
Electricity, boiler gas, fuel and compressed air in one place, with solar, grid and generator shown live.
Alerts before downtime
AI spots the trends that come before a failure and alerts the right people early, so maintenance is planned instead of rushed.
Industries FAQ
My industry isn't listed. Can En-Stream still help?
Yes, if energy or machine uptime matters on your site. En-Stream connects to PLCs, VFDs, meters and sensors from any vendor, so the equipment matters more than the industry. Contact us to talk about your site.
Can one platform cover sites in different industries?
Yes. Every site reports to the same platform, each with its own dashboards, and remote access lets you open any of them from any device.
Which gateway do I need?
The ES-IGW-B1 collects data from existing meters and controllers. The ES-IGW-E1 adds analog and digital inputs, CAN bus and relay outputs for sites that need direct sensor inputs and equipment control.
How long does installation take?
Most sites take 1–3 days on site: mounting gateways, wiring meters over RS485 or Modbus, and commissioning. Dashboards go live in the first week. Larger plants and multi-site rollouts are installed in phases, so production never stops.
See En-Stream on your site
Book a 30-minute demo and see how En-Stream connects to the meters, machines and generators you already run.